Hfl 3030 Drawn Cup Needle Roller Clutch Bearing (HFL 3030)
Basic Info
Model No.: HFL 3030
Product Description
Model NO.: HFL 3030 The Number of Rows: Single Material: Bearing Steel Load Direction: Radial Bearing Delivery: Stock Specification: CE, RoHS, SGS, GMP Rolling Body: Roller Bearings Outer Dimension: Small and Medium-Sized (60-115mm) Spherical: Non-Aligning Bearings Separated: Unseparated Trademark: IKC SKF NSK NTN KOYO NACHI IKO TWB HRB TIMKNE Origin: China, Japan, Germany, Sweden, France
rawn cup needle roller clutch HF HFL RC FC, please read pdf catalog for details.
Structure: This bearings has open ends and closed ends 2 types, gererally shaft diameter from 6-60mm, multi-lips seal available.
Accuracy: Needle mutual tolorence 2μ M, precision grade G2(ISO/GB309), Thin section out ring will be affected by rigid housing.
Material: Needle: GCr15 (100Cr6), Drawing cup and cage can use carbon steel
Instruction: Working temperature: -30_+100
Bearing No. Ref.
HF0406 HF0612 HF0812 HF1012 HF1216 HF1416 HF1616 HF1816 HF2016 HF2520 HF3020 HF3520 HFL0408 HFL0615 HFL0822 HFL1022 HFL1226 HFL1426 HFL1626 HFL1826 HFL2026 HFL2530 HFL3030 HFL3530 FCS-6 FCL-8-K FC-8 RC-061008-FS* FCL-10-K FC-10 FC-12 RC-081208-FS* RC-101410-FS* FC-16 RS-121610-FS* FC-20 FC-25 RC-162110-FS* FC-30 FCS-35
Features:1, are one-way clutches consisting of a thin- walled,drawn outer ring with a series of
ramps on the inside diameter,plastic cages,spring and needle rollers
2 can transmit torques in one direction
3 have particularly compact radial dimensions
4 have a high indexing accuracy-the individual spring retention of the needle rollers
ensures costant contact between the shaft,the needle roller and the ramps.
5 allow high indexing frequency- due to the low mass and the associated low moment
of inertia of the clamping elements
6 have a low free-wheeling frictional torque
7 are easy to fit-the bearings are pressed into the housing bore,no further axial location
is required
1:;KF,KF;
2:R;
Contact us if you need more details on One- Way Bearing. We are ready to answer your questions on packaging, logistics, certification or any Other aspects about Drawn Cup Needle Roller Bearing、Roller Bearing. If these products fail to match your need, please contact us and we would like to provide relevant information.
rawn cup needle roller clutch HF HFL RC FC, please read pdf catalog for details.
Structure: This bearings has open ends and closed ends 2 types, gererally shaft diameter from 6-60mm, multi-lips seal available.
Accuracy: Needle mutual tolorence 2μ M, precision grade G2(ISO/GB309), Thin section out ring will be affected by rigid housing.
Material: Needle: GCr15 (100Cr6), Drawing cup and cage can use carbon steel
Instruction: Working temperature: -30_+100
Bearing No. Ref.
HF0406 HF0612 HF0812 HF1012 HF1216 HF1416 HF1616 HF1816 HF2016 HF2520 HF3020 HF3520 HFL0408 HFL0615 HFL0822 HFL1022 HFL1226 HFL1426 HFL1626 HFL1826 HFL2026 HFL2530 HFL3030 HFL3530 FCS-6 FCL-8-K FC-8 RC-061008-FS* FCL-10-K FC-10 FC-12 RC-081208-FS* RC-101410-FS* FC-16 RS-121610-FS* FC-20 FC-25 RC-162110-FS* FC-30 FCS-35
Drawn cup needle roller clutch-HF...HFL...RC...FC | |||||
Bearing No. | Dimension (mm) | Mass | |||
New | Fw | D | C | (g) | |
HF0406 | 4 | 8 | 6 | 1 | |
HF0612 | 6 | 10 | 12 | 3 | |
HF0812 | 8 | 12 | 12 | 3.5 | |
HF1012 | 10 | 14 | 12 | 4 | |
HF1216 | 12 | 18 | 16 | 11.6 | |
HF1416 | 14 | 20 | 16 | 13 | |
HF1616 | 16 | 22 | 16 | 14 | |
HF1816 | 18 | 24 | 16 | 15.5 | |
HF2016 | 20 | 26 | 16 | 17 | |
HF2520 | 25 | 32 | 20 | 30.9 | |
HF3020 | 30 | 37 | 20 | 36 | |
HF3520 | 35 | 42 | 20 | 40 | |
HFL0408 | 4 | 8 | 8 | 1.6 | |
HFL0615 | 6 | 10 | 15 | 4 | |
HFL0822 | 8 | 12 | 22 | 6.3 | |
HFL1022 | 10 | 14 | 22 | 7.4 | |
HFL1226 | 12 | 18 | 26 | 18 | |
HFL1426 | 14 | 20 | 26 | 20.3 | |
HFL1626 | 16 | 22 | 26 | 22 | |
HFL1826 | 18 | 24 | 26 | 24.4 | |
HFL2026 | 20 | 26 | 26 | 27 | |
HFL2530 | 25 | 32 | 30 | 44 | |
HFL3030 | 30 | 37 | 30 | 51 | |
HFL3530 | 35 | 42 | 30 | 58 |
Features:1, are one-way clutches consisting of a thin- walled,drawn outer ring with a series of
ramps on the inside diameter,plastic cages,spring and needle rollers
2 can transmit torques in one direction
3 have particularly compact radial dimensions
4 have a high indexing accuracy-the individual spring retention of the needle rollers
ensures costant contact between the shaft,the needle roller and the ramps.
5 allow high indexing frequency- due to the low mass and the associated low moment
of inertia of the clamping elements
6 have a low free-wheeling frictional torque
7 are easy to fit-the bearings are pressed into the housing bore,no further axial location
is required
MODEL | MASS APPROX | BORNDARY DIMENSION | TORGUERATING | LIMITING SPEED | RADIAL LOAD | SPRING MATERIAL | CAGE MATERIAL | NEEDLE ROLLER MATERIAL | OUTER RING MATERIAL | ||
Fw | D | C | |||||||||
g | mm | Nm | rpm | N | |||||||
HFL2026 | 27 | 20 | 26 | 26 | 28.5 | 6500 | 8.9 | steel | PPs | GCr15 | ST14 |
Shaft Diameter | Clutch Designation | Mass Approx | Borndary Dimensions | Torgue Ma | 1 Limiting Speed | Suitable Drawn Cup Bearings | ||||
Plastic Springs | Steel Springs | Fw | D | C | Rotating Shaft Min-1 | Rotatng Outer Ring Min-1 | ||||
mm | g | mm | Nm | rpm | ||||||
HF | ||||||||||
3 | HF0306KF | 0.9 | 3 | 6.5 | 6 | 0.2 | 36000 | 7000 | HK0306TN | |
4 | HF0406KF | -- | 1 | 4 | 8 | 6 | 0.34 | 34000 | 8000 | HK0408TN |
HF0406KFR | -- | 1 | 4 | 8 | 6 | 0.1 | 34000 | 8000 | HK0408TN | |
6 | HF0608KF | 2.8 | 6 | 10 | 8 | 1.5 | 20000 | 11000 | HK0608 | |
HF0612KF | HF0612 | 3 | 6 | 10 | 12 | 1.76 | 23000 | 13000 | HK0608 | |
HF0612KFR | HF0612R | 3 | 6 | 10 | 12 | 1.76 | 23000 | 13000 | HK0608 | |
HF061210 | 3.5 | 6 | 12 | 10 | 3 | 20000 | 13000 | HK061208 | ||
8 | HF0812KF | HF0812 | 3.5 | 8 | 12 | 12 | 3.15 | 17000 | 12000 | HK0808 |
HF0812KFR | HF0812R | 3.5 | 8 | 12 | 12 | 4 | 17000 | 12000 | HK0808 | |
-- | HF061210 | 3.2 | 8 | 12 | 10 | 3 | 16000 | 12000 | HK0808 | |
-- | HF081410 | 3.6 | 8 | 14 | 10 | 4.6 | 15000 | 11000 | HK081410 | |
-- | HF081610 | 4.1 | 8 | 16 | 10 | 5.5 | 15000 | 11000 | HK081610 | |
-- | HF081412 | 4 | 8 | 14 | 12 | 5 | 16000 | 12000 | HK081410 | |
10 | HF1012KF | HF1012 | 4 | 10 | 14 | 12 | 5.3 | 14000 | 11000 | HK1010 |
HF1012KFR | HF1012R | 4 | 10 | 14 | 12 | 1.5 | 14000 | 11000 | HK1010 | |
12 | -- | HF1216 | 11 | 12 | 18 | 16 | 12.2 | 11000 | 8000 | HK1212 |
14 | -- | HF1416 | 13 | 14 | 20 | 16 | 17.3 | 9500 | 8000 | HK1412 |
16 | -- | HF1616 | 14 | 16 | 22 | 16 | 20.5 | 8500 | 7500 | HK1612 |
18 | -- | HF1816 | 16 | 18 | 24 | 16 | 24.1 | 7500 | 7500 | HK1812 |
20 | -- | HF2016 | 17 | 20 | 26 | 16 | 28.5 | 7000 | 6500 | HK2010 |
25 | -- | HF2520 | 30 | 25 | 32 | 20 | 66 | 5500 | 5500 | HK2512 |
30 | -- | HF3020 | 36 | 30 | 37 | 20 | 90 | 4500 | 4500 | HK3012 |
35 | -- | HF3520 | 40 | 35 | 42 | 20 | 121 | 3900 | 3900 | HK3512 |
1:;KF,KF;
2:R;
Shaft Diameter | Clutch Designation | Mass Approx | Borndary Dimensions | Torgue Ma | 1 Limiting Speed | Basic Load Ratings | |||||
Plastic Springs | Steel Springs | Fw | D | C | Rotating Shaft Min-1 | Rotatng Outer Ring Min-1 | C | Co | |||
KN | |||||||||||
mm | g | mm | Nm | rpm | |||||||
HFL | |||||||||||
3 | HFL0308 | -- | 3 | 3 | 3.6 | 8 | 1 | -- | -- | -- | -- |
4 | HFL0408 | -- | 3.5 | 4 | 8 | 8 | 1.5 | -- | -- | -- | -- |
6 | HFL0615KF | HFK0615 | 4 | 6 | 10 | 15 | 1.76 | 23000 | 13000 | -- | -- |
HFL0615KFR | HFL0615R | 4 | 6 | 10 | 15 | 0.5 | 23000 | 13000 | -- | -- | |
-- | HFL061012K | 5 | 6 | 10 | 12 | -- | 21000 | 12000 | -- | -- | |
8 | -- | HFL081212K | 6 | 8 | 12 | 12 | -- | 20000 | 12000 | -- | -- |
-- | HFL081412K | 7 | 8 | 14 | 12 | -- | 19000 | 12000 | -- | -- | |
HFL0822KF | HFL0822 | 7 | 8 | 12 | 22 | 3.15 | 17000 | 12000 | 4.05 | 4.15 | |
HFL0822KFR | HFL0822R | 7 | 8 | 12 | 22 | 1 | 17000 | 12000 | -- | -- | |
10 | HFL1022KF | HFL1022 | 8 | 10 | 14 | 22 | 5.3 | 14000 | 11000 | 4.3 | 4.65 |
HFL1022KFR | HFL1022R | 8 | 10 | 14 | 22 | 1.5 | 14000 | 11000 | -- | -- | |
12 | -- | HFL1226 | 18 | 12 | 18 | 26 | 12.2 | 11000 | 8000 | 6.3 | 6.5 |
14 | -- | HFL1426 | 20 | 14 | 20 | 26 | 17.3 | 9500 | 8000 | 7.1 | 7.7 |
16 | -- | HFL1626 | 22 | 16 | 22 | 26 | 20.5 | 8500 | 7500 | 7.7 | 9 |
18 | -- | HFL1826 | 25 | 18 | 24 | 26 | 24.1 | 7500 | 7500 | 8.3 | 10.3 |
20 | -- | HFL2026 | 27 | 20 | 26 | 26 | 28.5 | 7000 | 6500 | 8.9 | 11.5 |
25 | -- | HFL2530 | 44 | 25 | 32 | 30 | 66 | 5500 | 5500 | 10.9 | 14.1 |
30 | -- | HFL3030 | 51 | 30 | 37 | 30 | 90 | 4500 | 4500 | 12.6 | 17.6 |
35 | -- | HFL3530 | 58 | 35 | 42 | 30 | 121 | 3900 | 3900 | 13 | 19.3 |
Fw | D | C | |||
FC4K | 1 | 4 | 8 | 6 | 0.34 |
FC6 | 3 | 6 | 10 | 12 | 1.76 |
FC6K | 3 | 6 | 10 | 12 | 1.76 |
FC8 | 4 | 8 | 14 | 12 | 5.3 |
FCL8K | 3.5 | 8 | 12 | 12 | 5 |
FC10 | 4.8 | 10 | 16 | 12 | 6 |
FCL10K | 4 | 10 | 14 | 12 | 5.3 |
FC12 | 11 | 12 | 18 | 16 | 12.2 |
FC14K | 13 | 14 | 20 | 16 | 17.3 |
FC16 | 14 | 16 | 22 | 16 | 20.5 |
FC20 | 17 | 20 | 26 | 16 | 28.5 |
FC25 | 30 | 25 | 32 | 20 | 66 |
FC30 | 36 | 30 | 37 | 20 | 90 |
FC35 | 40 | 35 | 42 | 20 | 121 |
FCB8 | 10 | 14 | 14 | 20 | 5 |
FCB10 | 15 | 16 | 16 | 20 | 10 |
FCB12 | 18 | 18 | 18 | 26 | 12.2 |
FCB16 | 22 | 22 | 22 | 26 | 20.5 |
FCB20 | 27 | 26 | 26 | 26 | 28.5 |
FCB25 | 44 | 32 | 32 | 30 | 66 |
FCB30 | 51 | 37 | 37 | 30 | 90 |
FCB35 | 58 | 42 | 42 | 30 | 121 |
Fw | D | C | |||
RC040708 | 3.5 | 6.35 | 11.112 | 12.7 | 1.9 |
RC040708-FS | 3.5 | 6.35 | 11.112 | 12.7 | 1.9 |
RC061008 | 4.7 | 9.525 | 15.875 | 12.7 | 4.83 |
RC061008-FC | 4.7 | 9.525 | 15.875 | 12.7 | 4.83 |
RC081208 | 9.2 | 12.7 | 19.05 | 12.7 | 7.9 |
RC081208-FS | 9.2 | 12.7 | 19.05 | 12.7 | 7.9 |
RC101410 | 14.5 | 15.875 | 22.225 | 15.88 | 15.4 |
RC101410-FC | 14.5 | 15.875 | 22.225 | 15.88 | 15.4 |
RC121610 | 17 | 19.05 | 25.4 | 15.88 | 20.9 |
RC121610-FS | 17 | 19.05 | 25.4 | 15.88 | 20.9 |
RC162110 | 16.2 | 25.4 | 33.338 | 15.88 | 45 |
RC162110-FC | 16.2 | 25.4 | 33.338 | 15.88 | 45 |
RCB061014 | 12 | 9.525 | 15.875 | 22.22 | 4.83 |
RCB061014-FS | 12 | 9.525 | 15.875 | 22.22 | 4.83 |
RCB081214 | 16 | 12.7 | 19.05 | 22.22 | 7.9 |
RCB081214-FC | 16 | 12.7 | 19.05 | 22.22 | 7.9 |
RCB101416 | 21.3 | 15.875 | 22.225 | 25.4 | 15.4 |
RCB101416-FS | 21.3 | 15.875 | 22.225 | 25.4 | 15.4 |
RCB121616 | 26.5 | 19.05 | 25.4 | 25.4 | 20.9 |
RCB121616-FC | 26.5 | 19.05 | 25.4 | 25.4 | 20.9 |
RCB162117 | 44.8 | 25.4 | 33.338 | 26.99 | 45 |
RCB162117-FS | 44.8 | 25.4 | 33.338 | 26.99 | 45 |
shaft dia. d | boundary dimensions | torque capacity | |||||
Fw | D1 | D2 | B | A | |||
mm | mm | N.m (.) | Kg.cm(.) | ||||
4 | 4 | 8 | 8.4 | 6 | 2.6 | 0.08 | 0.82 |
4 | 8 | 8.4 | 6 | 2.6 | 0.15 | 1.53 | |
6 | 6 | 10 | 10.4 | 8 | 2.8 | 0.25 | 2.55 |
6 | 10 | 10.4 | 8 | 2.8 | 0.44 | 4.49 | |
6 | 10 | 10.4 | 8 | 2.8 | 0.44 | 4.49 | |
6 | 10 | 10.4 | 12 | 2.8 | 0.88 | 8.98 | |
8 | 8 | 12 | 12.4 | 9 | 2.6 | 0.49 | 5 |
8 | 12 | 12.4 | 9 | 2.6 | 0.88 | 8.98 | |
8 | 14.2 | 15 | 12 | 3.6 | 1.18 | 12.04 | |
8 | 14.2 | , , , , , , , , 15 | 12 | 3.6 | 1.96 | 20 | |
8 | 14.2 | 15 | 12 | 3.6 | 1.96 | 20 |
Contact us if you need more details on One- Way Bearing. We are ready to answer your questions on packaging, logistics, certification or any Other aspects about Drawn Cup Needle Roller Bearing、Roller Bearing. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : IKC Bearing
Other Products
Hot Products
Self-Aligning Roller Bearing 22214 Spherical Roller Bearingof Rolling BearingSI 10T/K Rod body with right or left-hand female thread rod ends bearing SI10T/KSK SERIES SHAFT SUPPORT SK3 SK4 SK5 SK6 SK8 SK10 SK13 SK16 SK20 SK25 SK30 SK35 SK40 SK50T511 thrust taper roller bearingIKO LWL9C1R60BP Linear Way L Standard type LWL9C1R60BPNeedle Roller Bearings with Inner Ring without Cage NAV4011NTN self-aligning ball bearing 1218K for adapter sleeves h218high quality ball screw SFK0801 SFK0802 for cnc machineTHK SSR30XW linear guide block SSR30 SSR30XW1SS bearingcustom-made Angular Contact Ball Bearing Excavator bearing size 215x300x33/36mmHigher accuracy trust ball bearings BD1B 351894TR57517 double row tapered roller bearingsKC042XP0 high percision thin section bearings KC042CP0cross roller bearing RU42 crossed roller slewing ring bearingRU85 bearing rich stock RU85UUCCO cross roller bearingKR40 KR40PP cam follower needle bearing