Tsn511g, Tsn512g, Tsn513G Seals, V-Ring Seals, Plummer Block Seals
Basic Info
Model No.: TSN511G, TSN512G, TSN513G
Product Description
Model NO.: TSN511G, TSN512G, TSN513G Application: Bearing Performance: High Pressure Standard: Standard, Nonstandard Trademark: IKC SKF NSK NTN KOYO NACHI IKO TWB HRB TIMKNE Origin: China, Japan, Germany, Sweden, France Material: Metal Rubber Type: Oil Seal Shape: X-Ring Delivery Time: Stock Specification: CE, RoHS, SGS, GMP V-ring seals
The V-ring seals (fig) consist of a V-ring and a sheet steel sealing washer with vulcanised rubber lip which fits into the sealing groove in the housing. The washer is protected against corrosion. The V-rings are made of nitrile rubber (NBR) and have a slim sealing lip which seals axially against the sealing washer. The V-ring "body", which sits tightly on the shaft and rotates with it, also serves as a flinger. V-ring seals provide efficient sealing even under difficult operating conditions such as high speeds, rough finished shafts etc.Operating data
V-rings can be operated at peripheral speeds of up to 12 m/s, but at speeds of more than 7 m/s they should be axially located on the shaft. V-rings can also be used at speeds greater than 12 m/s but it is then necessary to prevent them from lifting from their seats, for example, by providing a pressed steel support ring. The corresponding rotational speeds are given in the table. Recommended dimensions for appropriate support rings for axial and radial location will be found in the table. The maximum permissible misalignment of shaft relative to housing is approximately 1,5° for shaft diameters up to some 50 mm and approximately 1° for larger shafts of some 150 mm diameter. The permissible operating temperature range is -40 to +100 °C.
The permissible axial movement of shaft relative to housing is limited to ± 1 mm for shaft diameters up to 65 mm and to approximately ± 1,2 mm for larger shafts.
Designation
The V-ring seals are supplied in packs of two, so that for housings at shaft ends where an end cover is used at one side, one seal will be left over and should be kept as a spare.
The designation of each seal consists of the prefix TSN followed by the size identification and the suffix A e.g. TSN 509 A
TSNG206 TSN206G ¥8.4
TSNG207 TSN207G ¥9.9
TSNG208 TSN208G ¥11.0
TSNG209 TSN209G ¥11.7
TSNG210 TSN210G ¥14.0
TSNG211 TSN211G ¥14.7
TSNG212 TSN212G ¥15.3
TSNG213 TSN213G ¥15.9
TSNG215 TSN215G ¥17.7
TSNG216 TSN216G ¥18.6
TSNG217 TSN217G ¥19.5
TSNG218 TSN218G ¥21.0
TSNG219 TSN219G ¥25.5
TSNG220 TSN220G ¥30.0
TSNG222 TSN222G ¥35.7
TSNG224 TSN224G ¥39.0
TSNG226 TSN226G ¥42.9
TSNG228 TSN228G ¥46.5
TSNG230 TSN230G ¥51.0
TSNG232 TSN232G ¥56.7
TSNG308 TSN308G ¥12.0
TSNG309 TSN309G ¥15.0
TSNG310 TSN310G ¥16.5
TSNG311 TSN311G ¥18.0
TSNG312 TSN312G ¥18.9
TSNG313 TSN313G ¥20.4
TSNG314 TSN314G ¥22.2
TSNG315 TSN315G ¥26.7
TSNG316 TSN316G ¥36.0
TSNG317 TSN317G ¥48.0
TSNG319 TSN319G ¥57.0
TSNG320 TSN320G ¥72.0
Contact us if you need more details on Seals. We are ready to answer your questions on packaging, logistics, certification or any Other aspects about Oil Seal、Auto Parts. If these products fail to match your need, please contact us and we would like to provide relevant information.
The V-ring seals (fig) consist of a V-ring and a sheet steel sealing washer with vulcanised rubber lip which fits into the sealing groove in the housing. The washer is protected against corrosion. The V-rings are made of nitrile rubber (NBR) and have a slim sealing lip which seals axially against the sealing washer. The V-ring "body", which sits tightly on the shaft and rotates with it, also serves as a flinger. V-ring seals provide efficient sealing even under difficult operating conditions such as high speeds, rough finished shafts etc.Operating data
V-rings can be operated at peripheral speeds of up to 12 m/s, but at speeds of more than 7 m/s they should be axially located on the shaft. V-rings can also be used at speeds greater than 12 m/s but it is then necessary to prevent them from lifting from their seats, for example, by providing a pressed steel support ring. The corresponding rotational speeds are given in the table. Recommended dimensions for appropriate support rings for axial and radial location will be found in the table. The maximum permissible misalignment of shaft relative to housing is approximately 1,5° for shaft diameters up to some 50 mm and approximately 1° for larger shafts of some 150 mm diameter. The permissible operating temperature range is -40 to +100 °C.
The permissible axial movement of shaft relative to housing is limited to ± 1 mm for shaft diameters up to 65 mm and to approximately ± 1,2 mm for larger shafts.
Designation
The V-ring seals are supplied in packs of two, so that for housings at shaft ends where an end cover is used at one side, one seal will be left over and should be kept as a spare.
The designation of each seal consists of the prefix TSN followed by the size identification and the suffix A e.g. TSN 509 A
TSNG206 TSN206G ¥8.4
TSNG207 TSN207G ¥9.9
TSNG208 TSN208G ¥11.0
TSNG209 TSN209G ¥11.7
TSNG210 TSN210G ¥14.0
TSNG211 TSN211G ¥14.7
TSNG212 TSN212G ¥15.3
TSNG213 TSN213G ¥15.9
TSNG215 TSN215G ¥17.7
TSNG216 TSN216G ¥18.6
TSNG217 TSN217G ¥19.5
TSNG218 TSN218G ¥21.0
TSNG219 TSN219G ¥25.5
TSNG220 TSN220G ¥30.0
TSNG222 TSN222G ¥35.7
TSNG224 TSN224G ¥39.0
TSNG226 TSN226G ¥42.9
TSNG228 TSN228G ¥46.5
TSNG230 TSN230G ¥51.0
TSNG232 TSN232G ¥56.7
TSNG308 TSN308G ¥12.0
TSNG309 TSN309G ¥15.0
TSNG310 TSN310G ¥16.5
TSNG311 TSN311G ¥18.0
TSNG312 TSN312G ¥18.9
TSNG313 TSN313G ¥20.4
TSNG314 TSN314G ¥22.2
TSNG315 TSN315G ¥26.7
TSNG316 TSN316G ¥36.0
TSNG317 TSN317G ¥48.0
TSNG319 TSN319G ¥57.0
TSNG320 TSN320G ¥72.0
Appropriate bearings | |||||||||||
(Basic designations) | Housing | ||||||||||
da | Self-aligning Ball bearings | Spherical roller bearings | Principal dimensions | ||||||||
mm | Mass | Designations | |||||||||
A | L | H | H1 | Housing only | |||||||
mm | kg | ||||||||||
75 | 1217 K | 2217 K | - | 22217 K | C 2217 K | 125 | 320 | 183 | 95 | 10, 0 | SNL 517 |
75 | 1317 K | 2317 K | 21317 K | 22317 K | C 2317 K | 160 | 380 | 218 | 112 | 17, 6 | FSNL 520-617 |
75 | 1317 K | 2317 K | 21317 K | 22317 K | C 2317 K | 160 | 380 | 218 | 112 | 17, 6 | SNL 520-617 |
76, 2 | 1217 K | 2217 K | - | 22217 K | C 2217 K | 125 | 320 | 183 | 95 | 10, 0 | SNL 517 |
76, 2 | 1217 K | 2217 K | - | 22217 K | C 2217 K | 125 | 320 | 183 | 95 | 10, 0 | FSNL 517 |
76, 2 | 1317 K | 2317 K | 21317 K | 22317 K | C 2317 K | 160 | 380 | 218 | 112 | 17, 6 | FSNL 520-617 |
76, 2 | 1317 K | 2317 K | 21317 K | 22317 K | C 2317 K | 160 | 380 | 218 | 112 | 17, 6 | SNL 520-617 |
80 | 1218 K | 2218 K | 23218 K | 22218 K | C 2218 K | 140 | 345 | 194 | 100 | 12, 5 | FSNL 518-615 |
80 | 1218 K | 2218 K | 23218 K | 22218 K | C 2218 K | 140 | 345 | 194 | 100 | 12, 5 | SNL 518-615 |
80, 963 | 1218 K | 2218 K | 22218 K | 23218 K | C 2218 K | 140 | 345 | 194 | 100 | 12, 5 | FSNL 518-615 |
80, 963 | 1218 K | 2218 K | 22218 K | 23218 K | C 2218 K | 140 | 345 | 194 | 100 | 12, 5 | SNL 518-615 |
82, 55 | 1218 K | 2218 K | 22218 K | 23218 K | C 2218 K | 140 | 345 | 194 | 100 | 12, 5 | SNL 518-615 |
82, 55 | 1218 K | 2218 K | 22218 K | 23218 K | C 2218 K | 140 | 345 | 194 | 100 | 12, 5 | FSNL 518-615 |
82, 55 | 1319 K | 2319 K | 21319 K | 22319 K | C 2319 K | 175 | 410 | 242 | 125 | 22, 0 | FSNL 522-619 |
82, 55 | 1319 K | 2319 K | 21319 K | 22319 K | C 2319 K | 175 | 410 | 242 | 125 | 22, 0 | SNL 522-619 |
85 | 1219 K | 2219 K | - | 22219 K | - | 145 | 345 | 212 | 112 | 13, 7 | SNL 519-616 |
85 | 1219 K | 2219 K | - | 22219 K | - | 145 | 345 | 212 | 112 | 13, 7 | FSNL 519-616 |
85 | 1319 K | 2319 K | 21319 K | 22319 K | C 2319 K | 175 | 410 | 242 | 125 | 22, 0 | SNL 522-619 |
85 | 1319 K | 2319 K | 21319 K | 22319 K | C 2319 K | 175 | 410 | 242 | 125 | 22, 0 | FSNL 522-619 |
87, 313 | 1220 K | 2220 K | 22220 K | 23220 K | C 2220 K | 160 | 380 | 218 | 112 | 17, 6 | SNL 520-617 |
87, 313 | 1220 K | 2220 K | 22220 K | 23220 K | C 2220 K | 160 | 380 | 218 | 112 | 17, 6 | FSNL 520-617 |
75 | 1217 K | 2217 K | - | 22217 K | C 2217 K | 125 | 320 | 183 | 95 | 10, 0 | SNL 517 |
75 | 1317 K | 2317 K | 21317 K | 22317 K | C 2317 K | 160 | 380 | 218 | 112 | 17, 6 | FSNL 520-617 |
75 | 1317 K | 2317 K | 21317 K | 22317 K | C 2317 K | 160 | 380 | 218 | 112 | 17, 6 | SNL 520-617 |
76, 2 | 1217 K | 2217 K | - | 22217 K | C 2217 K | 125 | 320 | 183 | 95 | 10, 0 | SNL 517 |
76, 2 | 1217 K | 2217 K | - | 22217 K | C 2217 K | 125 | 320 | 183 | 95 | 10, 0 | FSNL 517 |
76, 2 | 1317 K | 2317 K | 21317 K | 22317 K | C 2317 K | 160 | 380 | 218 | 112 | 17, 6 | FSNL 520-617 |
76, 2 | 1317 K | 2317 K | 21317 K | 22317 K | C 2317 K | 160 | 380 | 218 | 112 | 17, 6 | SNL 520-617 |
80 | 1218 K | 2218 K | 23218 K | 22218 K | C 2218 K | 140 | 345 | 194 | 100 | 12, 5 | FSNL 518-615 |
80 | 1218 K | 2218 K | 23218 K | 22218 K | C 2218 K | 140 | 345 | 194 | 100 | 12, 5 | SNL 518-615 |
80, 963 | 1218 K | 2218 K | 22218 K | 23218 K | C 2218 K | 140 | 345 | 194 | 100 | 12, 5 | FSNL 518-615 |
80, 963 | 1218 K | 2218 K | 22218 K | 23218 K | C 2218 K | 140 | 345 | 194 | 100 | 12, 5 | SNL 518-615 |
82, 55 | 1218 K | 2218 K | 22218 K | 23218 K | C 2218 K | 140 | 345 | 194 | 100 | 12, 5 | SNL 518-615 |
82, 55 | 1218 K | 2218 K | 22218 K | 23218 K | C 2218 K | 140 | 345 | 194 | 100 | 12, 5 | FSNL 518-615 |
82, 55 | 1319 K | 2319 K | 21319 K | 22319 K | C 2319 K | 175 | 410 | 242 | 125 | 22, 0 | FSNL 522-619 |
82, 55 | 1319 K | 2319 K | 21319 K | 22319 K | C 2319 K | 175 | 410 | 242 | 125 | 22, 0 | SNL 522-619 |
85 | 1219 K | 2219 K | - | 22219 K | - | 145 | 345 | 212 | 112 | 13, 7 | SNL 519-616 |
85 | 1219 K | 2219 K | - | 22219 K | - | 145 | 345 | 212 | 112 | 13, 7 | FSNL 519-616 |
85 | 1319 K | 2319 K | 21319 K | 22319 K | C 2319 K | 175 | 410 | 242 | 125 | 22, 0 | SNL 522-619 |
85 | 1319 K | 2319 K | 21319 K | 22319 K | C 2319 K | 175 | 410 | 242 | 125 | 22, 0 | FSNL 522-619 |
87, 313 | 1220 K | 2220 K | 22220 K | 23220 K | C 2220 K | 160 | 380 | 218 | 112 | 17, 6 | SNL 520-617 |
87, 313 | 1220 K | 2220 K | 22220 K | 23220 K | C 2220 K | 160 | 380 | 218 | 112 | 17, 6 | FSNL 520-617 |
75 | 1217 K | 2217 K | - | 22217 K | C 2217 K | 125 | 320 | 183 | 95 | 10, 0 | SNL 517 |
75 | 1317 K | 2317 K | 21317 K | 22317 K | C 2317 K | 160 | 380 | 218 | 112 | 17, 6 | FSNL 520-617 |
75 | 1317 K | 2317 K | 21317 K | 22317 K | C 2317 K | 160 | 380 | 218 | 112 | 17, 6 | SNL 520-617 |
Contact us if you need more details on Seals. We are ready to answer your questions on packaging, logistics, certification or any Other aspects about Oil Seal、Auto Parts. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Plastic Parts&Oil Seals&Hardware
Premium Related Products
Other Products
Hot Products
Self-Aligning Roller Bearing 22214 Spherical Roller Bearingof Rolling BearingSI 10T/K Rod body with right or left-hand female thread rod ends bearing SI10T/KSK SERIES SHAFT SUPPORT SK3 SK4 SK5 SK6 SK8 SK10 SK13 SK16 SK20 SK25 SK30 SK35 SK40 SK50T511 thrust taper roller bearingIKO LWL9C1R60BP Linear Way L Standard type LWL9C1R60BPNeedle Roller Bearings with Inner Ring without Cage NAV4011NTN self-aligning ball bearing 1218K for adapter sleeves h218high quality ball screw SFK0801 SFK0802 for cnc machineTHK SSR30XW linear guide block SSR30 SSR30XW1SS bearingcustom-made Angular Contact Ball Bearing Excavator bearing size 215x300x33/36mmHigher accuracy trust ball bearings BD1B 351894TR57517 double row tapered roller bearingsKC042XP0 high percision thin section bearings KC042CP0cross roller bearing RU42 crossed roller slewing ring bearingRU85 bearing rich stock RU85UUCCO cross roller bearingKR40 KR40PP cam follower needle bearing